Fault location systems InterCable FOS

    • Fault location system R-Line

    • Innovative, modular, easy-to-service
    • Variable composition of measuring methods and functions
    • Easy installation in vehicles

The InterCable FOS R-Line cable measurement system is used as a mobile measuring station for monitoring, testing and cable fault location in power cables of low and medium voltage networks. The InterCab­le FOS R-Line contains a compilation of different measuring methods that are required for a successful cable fault location and cable testing. It distinguishes itself due to a new modular system. Thanks to the modular design, an extremely variable composition of different measuring methods and functions is possible adapted to the user requirements.

Basic versions of Fault location system InterCable FOS R-Line can be optimally extended with different modules and functions for any application.

The small installation dimensions of the entire system have been realised by the continuous development of small and compact designs of modules and components. In case of the high voltage systems, this has been achieved by using oil or gas-insulated and epoxy resin moulded components. This makes an installation of the system in different vehicle types extremely easy, especially into small vehicles.

InterEng offers the following basic versions of InterCable FOS R-Line:

  • InterCable FOS

    • R-32
    • R-50
    • R-80
  • Connection

    • one or three phase
    • one or three phase
    • one or three phase
  • Surging

    • 0...32kV / 1000 o. 2000J
    • 0...32kV / 1000 o. 2000J
    • 0...32kV / 1000 o. 2000J
  • Testing up to

    • 32 kV
    • 50 kV
    • 80 kV
  • Features

  • Compact design of modules and components
  • Cost-effective retrofitting of optional modules
  • Simple adaptation to new developments
  • Optimised for installation in vehicles due to small installation dimensions and less weight
  • Individual console design options
  • Modern process-controlled menu assistance
  • Central control unit with CAN-Bus system technology
  • Advanced safety concept for operator, system and test specimen
  • Simple, quick and intuitive operation of the entire system
  • Measuring methods:

  • All presently accepted measuring methods could be used with the installed units, modules and options The surging Arc Reflection method (ART) is include the standard system.
  • Testing

  • Insulation measurement up to 1000 MΩ
  • DC testing
  • VLF testing ( according VDE 0276 )
  • Cable sheath testing
  • Cable selection
  • Prelocation

  • Reflection measurement direct via LV-cable 1 and 3 phase ( InterFlex direct )
  • Reflection measurement direct via HV-cable 1 and 3 phase (InterFlex direct )
  • Surging Arc Reflection Technique ( ART )
  • Burning Arc Reflection Technique ( ART )
  • Surging current coupling ( SCC )
  • Decay coupling ( DVC )
  • Pinpoint location

  • Surging with low surge rates ( 3-10 sec. ) with 1000J or 2000J for better audibility.
  • Distance measurement (surge generator and und impact sound indicator) with the optional Kamphone set
  • Optional magnetic pinpoint location and trace location with the audio frequency generator TG 250 as voltage supply.
  • Options:

  • The base versions could be added with reasonable designed and cost-efficient options for different applications.
  • High voltage options

  • Increase of surge energy up to 2000J for all surge voltages 8/16/32 kV for better pinpointing of greater cable length
  • Surge module 4kV 1000J, for pinpointing with lower voltage and higher energy specially in light net works
  • Surge module 4kV 2000J, for pinpointing with lower voltage and higher energy specially in light net works
  • Burning module up to 15kV 25A, for down burning of high resistance cable faults
  • VLF 36kV 0.1Hz module, for cable diagnostic
  • ART burning, for prelocation of high resistance cable faults
  • Measurement technique for pin pointing, sheath test and cable selection

  • Kamphone, acoustic pinpointing system for precise pin pointing of cable flash over faults
  • Locator Set 250, cable location system for cable trace location
  • InterSheath, cable sheath test system
  • InterSelect, cable select system
  • Self power supply for car assembly

  • Travelpower
  • Silent power, supply from car battery
  • Emergency power unit

Products

  • Contact
  • InterEng GmbH Kabelmesstechnik
  • Radeburger Straße 9
  • D-01561 Zschorna/Germany
  •  
  • Phone.: +49 35208 3424 - 0
  • Fax: +49 35208 3424 - 10
  • mail@intereng-kmt.com